日本尼康V12系列精密轮廓投影机
产品简介
详细信息
內建垂直/斜角的表面燈源切換,可以觀察立體和量測狀態或瑕疵。 | |||
內建角度器(V-12BDC和V12-BD)及XY顯示器(V-12BDC和V-12BSC)。 | |||
底部光源有一個ZOOM type 聚光鏡,可調整至所需物鏡倍率之光圈,使用 200至 500倍及 CF金相鏡頭必須使用 DIC聚光鏡。 | |||
可選擇形式 | |||
| 內建角度器 | 內建 XY 顯示器 | D:DELUXE TYPE 有數位角度器 |
V-12BDC | ○ | ○ | S:STAND TYPE 不含數位角度器 |
V-12BDC | ○ | — | C:有數位 XY 顯示器 |
V-12BDC | — | ○ | 全部機型都有 AC100-120V 或 AC220-240V |
V-12BDC | — | — |
|
|
|
|
|
尺寸圖 |
此尋邊器設計目的為平順零誤差的操作和提供±1μm 精度。工件可被移動到尋邊器的任何方向,可藉由連接 SC-212 自動透過資料處理至 SC-212,或內建的XY顯示器及其他2D的資料處理機作自動的資料處理。(尋邊訊號只有在量測模式下才能傳送到 SC-212 ) |
|
|
|
|
|
V-12B規格表 | ||||
| V-12BDC | V-12BD | V-12BSC | V-12BS |
螢幕尺寸 | 305mm(12.0 in.)in diameter with etched center crossline | |||
| Provided with digital protractor fine rotation knob. 360°rotatable(with digital reading to 1 minute of arc) | Fixed screen | ||
物鏡 | 5X, 10X, 20X, 25X, 50X, 100X, 200X and 500X | |||
| 3-lens turret; clamp screw type | |||
影像 | Erect and unreversed | |||
量測精度 | Contour illumination±0.1%, vertical/oblique surface illumination ±0.15% | |||
載物台 | Types 10X6, 8X6, 6X4, 4X4, O3L and 2X2 | |||
光源 | High/low light intensity control; 24V150W halogen lamp | |||
穿透光 | ecentric type; 200X and 500X lenses should be used with a DIA condenser lens | |||
垂直表面光 | All projection lenses feature internal half-reflecting mirrors which are prealigned to the built-in vertical surface illuminator; 500X lens should be used with an EPI condenser lens | |||
斜的表面光 | Oblique surface illumination can be obtained by tilting EPI illumination unit | |||
zui大工件亮度 | 70mm(2.8 in.)with 10X6, 100mm(4.0 in.)with 8X6, 6X4, 4X4, O3L and 2X2 | |||
zui大荷重 | 10X6: 20kg(44.1 lbs.); 8X6: 15kg(33.0 lbs.); 6X4: 10kg(22.0 lbs.); 4X4: 6kg(13.2 lbs.); O3L and 2X2: 5kg(11.0 lbs.) | |||
電源 | ?AC100/120V(50/60Hz): fuse AC125V/T5A | |||
| ?AC220/230/240V(50/60Hz): fuse AC250V/T5A | |||
尺寸 | 409 X 648 X 970-1070mm(16.1 X 25.5 X 38.2-42.1 in.) | |||
重量 | Approx. 80kg(176.4 lbs.) | |||
XY顯示器 | Built in(1.0μm / 0.5μm selectable) | Not provided | Built in(1.0μm / 0.5μm selectable) | Not pr |