Buehler标乐样品磨抛机NelsonZimmer的技术参数
NelsonZimmer® 2000 System is for precision, high volume cross-sectioning of printed wiring board through-holes
to ≥0.008″ (200μm) in diameter. It includes the EcoMet® 4000 which features a 12″ (305mm) platen, table-top unit, variable speed
from 10-500 rpm in 10 rpm increments, digital LED speed display, LED bar graph motor indicator, touch-pad controls including illuminated
power on/off switch, motor speed, motor run/stop switch with built in memory, water on/off switch, cover and removable
splash ring. The AutoMet® 2000 Power Head with RIM cabinetry features controlled application of force from 5 to 60 pounds in 1
pound increments, touch pad control of time, force head direction, and fluid selection. Operational time is variable from 0 to 99
minutes, 59 seconds in 1 second increments. The PC Met® Precision High Volume Printed Wiring Board Accessory (60-5090)
offered only with the NelsonZimmer® 2000 system contains 6 cavities each capable of holding 6 (0.125″ or 3.175mm thick) printed
wiring board coupons up to 1″ (25.4mm) long. It comes complete with top mold plate, magnetic mold base, 6 quick-set flat tungsten
carbide stops, coupon loader, lift chuck drive adapter, silicon mold spray, 1000 indexing pins, dial indicator calibration gauge,
gauge blocks and operating instructions. For 85-264V/50-60Hz/1 phase operation.

Buehler标乐样品磨抛机NelsonZimmer的主要特点
49-1794 NelsonZimmer® 3000 System is the same as above for the EcoMet® 4000 and AutoMet® 2000 but includes the
PWB Met™ Small Hole Accessory (60-5175) for cross-sectioning through-holes to ≥0.004″ (100μm) in diameter. This accessory will
prepare up to 18 coupons at one time, 1″ (25.4mm) long, in 6 cavities. It comes complete with top mold plate, magnetic mold
base, 6 quick-set flat polycrystalline diamond stops, coupon loader, lift chuck drive adapter, silicon mold spray, 3000 indexing pins,
dial indicator calibration gauge, gauge blocks and operating instructions. For 85-264V/50-60Hz/1 phase operation